A Detailed Guide to Reset Linksys Velop System

Resetting your Linksys Velop system and performing the Linksys extender setup again might be disturbing. Right? But you have no other choice. If your facing issues with your Linksys Velop system, then resetting it back to factory default values would be the best thing to consider.

You might be thinking about configuring the Linksys extender again. Alas! The most frustrating thing. You have given your precious time in setting up Linksys extender and now you're going to reset it.

But don't worry! Sensing this need, we have come up with this particular post. Once we will help you in resetting Linksys extender and then we will help you to set it up. Let's get started!

Note: The entire settings you have customized during the Linksys extender setup process such as WiFi name (SSID), passwords, and security settings will be erased. Once you reset your device, all the WiFi-enabled devices will disconnect from Linksys extender setup-xxx.

  1. Turn on your Linksys Velop system.
  2. Then, press and hold the “Reset” button on the bottom panel of the Velop system.
  3. The LED on top panel of the node will light red.
  4. Red color light means the reset process of Linksys Velop system has been completed successfully.

Now, if you have successfully setup Linksys Velop, you can now take a plunge to set it up.

Don't know the Linksys WiFi extender setup process? Worry now as we are always there to assist you. Simply follow the steps given below and set up your Linksys extender with great ease. Keep reading!

To setup Linksys extender, follow the step-by-step instructions given below:

Power Supply

Supply a continuous power supply to your Linksys Velop system. For this, you have to make sure that your Linksys device is plugged properly into a working wall outlet.

Check LED

The LED light on your Linksys device must be stable.


The connection between your main router and the Linksys device must be successfully established via Ethernet cable.

WiFi Network

For setting up Linksys extender, make sure to get connected to Linksys extender setup-xxx.

Internet Browser

To access the Linksys extender login page, make sure you are using a relevant web browser that must be free from the load of temporary files, browsing history, cache, and cookies.
Log In
  1. You can either access the setup page of your Linksys extender using or Linksys extender IP address.
  2. Press Enter.
  3. Provide admin password to the required field and click on OK or Log IN.
Linksys Extender Configuration
  1. Linksys extender setup screen displays.
  2. Follow the on-screen instructions.
  3. Once your Linksys device is set up successfully, you can unplug it. Plug it into a working outlet (as per your reference) near to your main router.

See, how simple is the setup process of your Linksys extender. Now, your device is successfully configured and you can enjoy the fast and uninterrupted internet range in every corner of your house - even in those areas where WiFi seems to disappear.