Accessing
the web-based setup page of Linksys extender allows users to
configure advanced settings in a matter of minutes. But, if you are
facing issues while accessing the page, this can be due to reasons
like:
- A proper connection to the Linksys device is not established. Or,
- Your WiFi range extender is connected to your router but detecting no internet.
This post
will help you troubleshoot the problem you are facing with your
Linksys extender. Go through the steps below to fix the issue.
Check the
LED lights on your extender
The LED lights on your extender can help you determine its status. To
know about LEDs, either access user guide or get in touch with an
expert technician.
Check the
placement of your extender
Make sure you have placed the WiFi device at the right location and
in the same room where your router currently is. Also, try to keep
your device away from refrigerators, Bluetooth devices, cellular
phones, etc. as these may create interference with the signals of
your WiFi extender.
Consider
having proper connections
Improper connections can also stop you from accessing the dashboard
of your Linksys extender. If you have used an Ethernet cable to
connect your WiFi devices, then make sure it has no cuts or breakage.
Also, check if all your devices, including router, modem, and
extender are connected accurately to a power outlet as well as
fetching adequate power supply.
Fix
browser-related issues
The reason behind not accessing the web-based setup page of Linksys
extender can be browser-related. So, you are advised to keep your web
browser updated to the latest version. Also, consider clearing cache,
cookies, and browsing history from the browser you are using to
access extender.linksys.com.
Use the
default IP
Most of the times, users are not able to access the default web
address of Linksys extender. While accessing the URL, users get stuck
with an error message saying can't connect to internet. In such a
case, switch to the default IP of your device and try to establish
internet connection.
Update
the firmware
An extender running an outdated firmware can also face the issue of
not accessing setup page. To fix this, update the firmware of both
your router and extender to the latest version. To get the update,
you can approach the official site of Linksys.
Power
cycle your extender
To power cycle your device, simply plug out and plug in the device
from the power outlet. Wait for a while and let the LEDs on range
extender get active.
Reset and
reconfigure your device
Improper extender setup can also create issues, therefore you are
suggested to reset and reconfigure your extender using the proper
steps.
If you don't know the complete Linksys extender setup steps,
then worry not. We've got you covered. Have a nudge on the steps
given below and configure your Linksys extender without any hassle.
Complete
Steps to Set up Linksys Extender
- Plug in your WiFi range extender to a power outlet and turn it on.
- Wait for the LED on it to turn orange.
- Connect your router to the Linksys extender using an Ethernet cable or wirelessly.
- Launch a web browser on your laptop/computer.
- Enter extender.linksys.com in the web address bar.
- This will launch the setup wizard.
- Enter your default password and hit Next.
- Follow the on-screen prompts and complete the setup process.
We hope that following the steps above you will be able to fix the
“Can't Access Linksys Extender's Web-based Setup Page” issue. If
the issue still annoying you, get in touch with expert technicians to
get it resolved.
